Shenzhen Nufiber Systems Technology Co., Ltd.
Challenges are opportunities and breakthroughs are growth.
Add to Cart
10/100M POE Injector Single Port,IEEE802.3af,15.4W
Description
The NF-PSE300 is a Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. The NF-PSE300 supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3af PoE standard. It can work with 10/100Base-T networking devices such as Wi-MAX and wireless IEEE 802.11n access points. By adding a PoE Splitter (PS4812) to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in NF-PSE300, people can get the benefit of flexible network installation at lower cost, less downtime.
Key Feature
Specification
| Standards Compliance | Dimensions (L x W x H) / Weight |
| IEEE 802.3 10Base-T Ethernet | 145.7 x 64.39 x 43.4mm |
| IEEE 802.3u 100Base-Tx Fast Ethernet | 162.9g |
| IEEE 802.3af Power over Ethernet | Indicators |
| Connector: RJ-45 10/100 Mbps | AC Power (Orange) / PoE (Green) |
| PoE Power Output | Environmental Conditions |
| Pin Assignment and Polarity: 1/2(+), 3/6 (-) | Operating Temperature: 0~45°C |
| Output Power Voltage: 48-56 Vdc | Storage Humidity: |
| Power: 15.4 Watts Max. | Maximum 95%, Non-condensing |
| Input Power AC Input Voltage: 100~240 VAC | Regulatory |
| Requirements AC Input Current: ≤0.7A @ 100-240 VAC | CE/FCC |
| AC Frequency: 50~60 Hz | Safety Approvals |
| EN 60950-1: 2006 | |
| FCC PART 15 | |
Product Show
Factory Show
Shipping Method
CE certification
FAQ